Garantice la máxima seguridad en zonas peligrosas con nuestros prensaestopas antideflagrantes con certificación ATEX e IECEx. Diseñados para ofrecer fiabilidad en las zonas 1 y 2. Proteja sus activos. Consúltenos ahora.
¿Necesita productos para su proyecto?
Entendemos que la contratación puede ser un reto.
Rellene el formulario con sus artículos específicos -no dude en indicar incluso componentes únicos o difíciles de encontrar-, envíe su consulta y obtenga las soluciones a medida que está buscando. Olvídese de las ofertas genéricas; somos especialistas en comprender sus necesidades exactas y ofrecerle resultados que se ajustan como un guante.
Garantizar la máxima seguridad y conformidad en ubicaciones peligrosas.
ATEX
IECEx
Certificación UL
Certificado CSA
En entornos con riesgo de explosión por gases, vapores o polvo inflamables, cada componente es importante. Nuestros prensaestopas antideflagrantes están diseñados para ofrecer el máximo nivel de seguridad, garantizando una conexión segura y conforme a la normativa para sistemas eléctricos en las ubicaciones peligrosas más exigentes.
Certificado para entornos de gas y polvo (zonas 1, 2, 21, 22)
Protección ignífuga (Ex d) y seguridad aumentada (Ex e)
Construcción robusta de latón niquelado o SS316L
Para cables blindados y no blindados
Encuentre el prensaestopas antideflagrante adecuado para su aplicación. Seleccione por material, tamaño de rosca y tipo de cable para garantizar una instalación segura y conforme a la normativa.
| Prensaestopas serie BW - Rosca métrica y NPT | |||||
|---|---|---|---|---|---|
| Hilo | Tamaño de rosca MÉTRICO |
Tamaño de rosca NPT |
Longitud mínima de la rosca | Alcance del cable Mín (mm) | Alcance máx. del cable (mm) |
| BW20S | M20 | 1/2″ | 10 | 11.5 | 15.5 |
| BW20L | M20 | 1/2″ | 10 | 14 | 20.5 |
| BW25S | M25 | 3/4″ | 10 | 18 | 24 |
| BW25L | M25 | 3/4″ | 10 | 20 | 27 |
| BW32S | M32 | 1″ | 10 | 26.3 | 33.5 |
| BW32L | M32 | 1″ | 10 | 26.3 | 33.5 |
| BW40S | M40 | 1-1/4″ | 13 | 31.5 | 39.5 |
| BW40L | M40 | 1-1/4″ | 13 | 32 | 40 |
| BW50S | M50 | 1-1/2″ | 13 | 38.2 | 46.3 |
| BW50L | M50 | 2″ | 13 | 44 | 52.6 |
| BW63S | M63 | 2″ | 14 | 50.1 | 59 |
| BW63L | M63 | 2-1/2″ | 14 | 56 | 65.3 |
| BW75S | M75 | 2-1/2″ | 15 | 62 | 71.6 |
| BW75L | M75 | 3″ | 15 | 68 | 78 |
| BW90 | M90 | 3″ | 20 | 80.5 | 91 |
| Prensaestopas serie CW - Rosca de conducto | ||||
|---|---|---|---|---|
| Hilo | Tamaño de rosca | Longitud mínima de la rosca | Alcance del cable Mín (mm) | Alcance máx. del cable (mm) |
| CW20S | 20 | 10 | 11.8 | 17.8 |
| CW20L | 20 | 10 | 14.0 | 20.8 |
| CW25S | 25 | 10 | 18.0 | 24.0 |
| CW25L | 25 | 10 | 20.3 | 27.4 |
| CW32S | 32 | 10 | 24.5 | 31.0 |
| CW32L | 32 | 10 | 26.5 | 34.2 |
| CW40S | 40 | 13 | 30.4 | 38.5 |
| CW40L | 40 | 13 | 33.2 | 41.0 |
| CW50S | 50 | 13 | 40.0 | 47 |
| CW50L | 50 | 13 | 44.0 | 53.5 |
| CW63S | 63 | 14 | 50.0 | 59.0 |
| CW63L | 63 | 13.5 | 56.0 | 66.0 |
| CW75S | 75 | 15 | 63.5 | 73.0 |
| CW75L | 75 | 15 | 69.0 | 73.0 |
| Prensaestopas serie Ex-V - Rosca métrica/NPT/G | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Hilo (M) |
Serie métrica Código |
Hilo (NPT/G) |
Serie NPT Código |
Serie G Código |
Gama de cables | H (mm) |
L (mm) |
Tamaño hexagonal | ||
| Hilo | Hilo | Hilo | B (mm) |
A (mm) |
En pisos |
En esquinas |
||||
| M16*1.5 | Ex-V08-M16 | 3/8″ | Ex-V08-NPT3/8 | Ex-V08-G3/8 | 5-8 | 3-6 | 30 | 12 | 24 | 28 |
| Ex-V10-M16 | Ex-V10-NPT3/8 | Ex-V10-G3/8 | 6-10 | 4-8 | 30 | 12 | 24 | 28 | ||
| M20*1.5 | Ex-V14-M20 | 1/2″ | Ex-V14-NPT1/2 | Ex-V14-G1/2 | 9-14 | 6-11 | 30 | 12 | 24 | 28 |
| Ex-V16-M20 | Ex-V16-NPT1/2 | Ex-V16-G1/2 | 10-16 | 7-12 | 30 | 12 | 24 | 28 | ||
| Ex-V18-M20 | Ex-V18-NPT1/2 | Ex-V18-G1/2 | 13-18 | 9-14 | 32 | 12 | 30 | 35 | ||
| M25*1.5 | Ex-V21-M25 | 3/4″ | Ex-V21-NPT3/4 | Ex-V21-G3/4 | 15-21 | 11-17 | 35 | 13 | 36 | 42 |
| Ex-V24-M25 | Ex-V24-NPT3/4 | Ex-V24-G3/4 | 17-24 | 13-20 | 35 | 13 | 40 | 47 | ||
| M32*1.5 | Ex-V28-M32 | 1″ | Ex-V28-NPT1 | Ex-V28-G1 | 20-28 | 16-23 | 39 | 15 | 46 | 53 |
| Ex-VK2-M32 | Ex-V32-NPT1 | Ex-V32-G1 | 23-32 | 18-26 | 39 | 15 | 46 | 53 | ||
| M40*1.5 | Ex-V35-M40 | 1-1/4″ | Ex-V35-NPT1-1/4 | Ex-V35-G1-1/4 | 26-35 | 21-29 | 43 | 15 | 55 | 64 |
| Ex-V38-M40 | Ex-V38-NPT1-1/4 | Ex-V38-G1-1/4 | 31-38 | 25-32 | 43 | 15 | 55 | 64 | ||
| M50*1.5 | Ex-V41-M50 | 1-1/2″ | Ex-V41-NPT1-1/2 | Ex-V41-G1-1/2 | 34-41 | 28-35 | 48 | 15 | 65 | 75 |
| Ex-V44-M50 | Ex-V44-NPT1-1/2 | Ex-V44-G1-1/2 | 37-44 | 31-38 | 48 | 15 | 65 | 75 | ||
| M63*1.5 | Ex-V50-M63 | 2″ | Ex-V50-NPT2 | Ex-V50-G2 | 40-50 | 33-43 | 53 | 16 | 80 | 92 |
| Ex-V55-M63 | Ex-V55-NPT2 | Ex-V55-G2 | 43-55 | 36-47 | 53 | 16 | 80 | 92 | ||
| M75*1.5 | Ex-V63-M75 | 2-1/2″ | Ex-V63-NPT2-1/2 | Ex-V63-G2 | 50-63 | 42-53 | 58 | 16 | 96 | 111 |
| Ex-V68-M75 | Ex-V68-NPT2-1/2 | Ex-V68-G2-1/2 | 54-68 | 45-58 | 58 | 16 | 96 | 111 | ||
| M88*2 | Ex-V72-M88 | 3″ | Ex-V72-NPT3 | Ex-V72-G3 | 62-72 | 52-62 | 64 | 18 | 114 | 134 |
| Ex-V79-M88 | Ex-V79-NPT3 | Ex-V79-G3 | 67-79 | 56-67 | 64 | 18 | 114 | 134 | ||
| M110*2 | Ex-V89-M110 | 4″ | Ex-V89-NPT4 | Ex-V89-G4 | 78-89 | 65-75 | 70 | 18 | 128 | 148 |
| Ex-V105-M110 | Ex-V105-NPT4 | Ex-V105-G4 | 88-104.5 | 74-91 | 70 | 18 | 138 | 148 | ||
| Prensaestopas serie Ex-VIIG - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Máx. Salida (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M16 × 1.5 | Ex-VIIGM16 | 5-16 | 10 | 15 | 24 |
| M20 × 1.5 | Ex-VIIGM20 | 5-16 | 10 | 15 | 24 |
| M20 × 1,5D | Ex-VIIGM20D | 5-20 | 15 | 15 | 30 |
| M25 × 1.5 | Ex-VIIGM25 | 5-20 | 15 | 15 | 30 |
| M25 × 1,5D | Ex-VIIGM25D | 8-26 | 20 | 15 | 38 |
| M32 × 1.5 | Ex-VIIGM32 | 8-26 | 20 | 17 | 38 |
| M32 × 1,5D | Ex-VIIGM32D | 15-33 | 26 | 17 | 45 |
| M40 × 1.5 | Ex-VIIGM40-33 | 15-33 | 26 | 17 | 45 |
| M40 × 1,5D | Ex-VIIGM40D | 16-40 | 33 | 17 | 55 |
| M50 × 1.5 | Ex-VIIGM50 | 16-40 | 33 | 20 | 55 |
| M50 × 1,5D | Ex-VIIGM50D | 18-50 | 41 | 20 | 68 |
| M63 × 1.5 | Ex-VIIGM63 | 18-50 | 41 | 20 | 68 |
| M63 × 1,5D | Ex-VIIGM63D | 25-64 | 53 | 20 | 82 |
| M75 × 2 | Ex-VIIGM75 | 25-64 | 53 | 22 | 82 |
| M88 × 2 | Ex-VIIGM88 | 31-80 | 75 | 22 | 98 |
| M100 × 2 | Ex-VIIGM100 | 40-96 | 83 | 22 | 110 |
| M115 × 2 | Ex-VIIGM115 | 40-103 | 90 | 22 | 125 |
| M130 × 2 | Ex-VIIGM130 | 98-119 | 100 | 22 | 140 |
| NPT 3/8 | Ex-VIIGNPT3/8 | 5-16 | 10 | 15 | 24 |
| NPT 1/2 | Ex-VIIGNPT1/2 | 5-16 | 10 | 15 | 24 |
| NPT 1/2D | Ex-VIIGNPT1/2D | 5-20 | 15 | 15 | 30 |
| NPT 3/4 | Ex-VIIGNPT3/4 | 5-20 | 15 | 15 | 30 |
| NPT 3/4D | Ex-VIIGNPT3/4D | 8-26 | 20 | 15 | 38 |
| NPT 1 | Ex-VIIGNPT1 | 8-26 | 20 | 17 | 38 |
| NPT 1D | Ex-VIIGNPT1D | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4 | Ex-VIIGNPT1-1/4 | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4D | Ex-VIIGNPT1-1/4D | 16-40 | 33 | 17 | 55 |
| NPT 1-1/2 | Ex-VIIGNPT1-1/2 | 16-40 | 33 | 20 | 55 |
| NPT 1-1/2D | Ex-VIIGNPT1-1/2D | 18-50 | 41 | 20 | 68 |
| NPT 2 | Ex-VIIGNPT2 | 18-50 | 41 | 20 | 68 |
| NPT 2D | Ex-VIIGNPT2D | 25-64 | 53 | 20 | 82 |
| NPT 2-1/2 | Ex-VIIGNPT2-1/2 | 25-64 | 53 | 22 | 82 |
| NPT 3 | Ex-VIIGNPT3 | 31-80 | 75 | 22 | 98 |
| NPT 4 | Ex-VIIGNPT4 | 40-103 | 90 | 22 | 125 |
| G 3/8 | Ex-VIIGG3/8 | 5-16 | 10 | 15 | 24 |
| G 1/2 | Ex-VIIGG1/2 | 5-16 | 10 | 15 | 24 |
| G 1/2D | Ex-VIIGG1/2D | 5-20 | 15 | 15 | 30 |
| G 3/4 | Ex-VIIGG3/4 | 5-20 | 15 | 15 | 30 |
| SOL 3/4D | Ex-VIIGG3/4D | 8-26 | 20 | 15 | 38 |
| G 1 | Ex-VIIGG1 | 8-26 | 20 | 17 | 38 |
| G 1D | Ex-VIIGG1D | 15-33 | 26 | 17 | 45 |
| G 1-1/4 | Ex-VIIGG1-1/4 | 15-33 | 26 | 17 | 45 |
| G 1-1/4D | Ex-VIIGG1-1/4D | 16-40 | 33 | 17 | 55 |
| G 1-1/2 | Ex-VIIGG1-1/2 | 16-40 | 33 | 20 | 55 |
| G 1-1/2D | Ex-VIIGG1-1/2D | 18-50 | 41 | 20 | 68 |
| G 2 | Ex-VIIGG2 | 18-50 | 41 | 20 | 68 |
| G 2D | Ex-VIIGG2D | 25-64 | 53 | 20 | 82 |
| G 2-1/2 | Ex-VIIGG2-1/2 | 25-64 | 53 | 22 | 82 |
| G 3 | Ex-VIIGG3 | 31-80 | 75 | 22 | 98 |
| G 4 | Ex-VIIGG4 | 40-103 | 90 | 22 | 125 |
| Prensaestopas serie Ex-VIIIG - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Máx. Salida (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M16 × 1.5 | Ex-VIIIGM16 | 5-16 | 10 | 15 | 24 |
| M20 × 1.5 | Ex-VIIIGM20 | 5-16 | 10 | 15 | 24 |
| M20 × 1,5D | Ex-VIIIGM20D | 5-20 | 15 | 15 | 30 |
| M25 × 1.5 | Ex-VIIIGM25 | 5-20 | 15 | 15 | 30 |
| M25 × 1,5D | Ex-VIIIGM25D | 8-26 | 20 | 15 | 38 |
| M32 × 1.5 | Ex-VIIIGM32 | 8-26 | 20 | 17 | 38 |
| M32 × 1,5D | Ex-VIIIGM32D | 15-33 | 26 | 17 | 45 |
| M40 × 1.5 | Ex-VIIIGM40-33 | 15-33 | 26 | 17 | 45 |
| M40 × 1,5D | Ex-VIIIGM40D | 16-40 | 33 | 17 | 55 |
| M50 × 1.5 | Ex-VIIIGM50 | 16-40 | 33 | 20 | 55 |
| M50 × 1,5D | Ex-VIIIGM50D | 18-50 | 41 | 20 | 68 |
| M63 × 1.5 | Ex-VIIIGM63 | 18-50 | 41 | 20 | 68 |
| M63 × 1,5D | Ex-VIIIGM63D | 25-64 | 53 | 20 | 82 |
| M75 × 2 | Ex-VIIIGM75 | 25-64 | 53 | 22 | 82 |
| M88 × 2 | Ex-VIIIGM88 | 31-80 | 75 | 22 | 98 |
| M100 × 2 | Ex-VIIIGM100 | 40-96 | 83 | 22 | 110 |
| M115 × 2 | Ex-VIIIGM115 | 40-103 | 90 | 22 | 125 |
| M130 × 2 | Ex-VIIIGM130 | 98-119 | 100 | 22 | 140 |
| NPT 3/8 | Ex-VIIIGNPT3/8 | 5-16 | 10 | 15 | 24 |
| NPT 1/2 | Ex-VIIIGNPT1/2 | 5-16 | 10 | 15 | 24 |
| NPT 1/2D | Ex-VIIIGNPT1/2D | 5-20 | 15 | 15 | 30 |
| NPT 3/4 | Ex-VIIIGNPT3/4 | 5-20 | 15 | 15 | 30 |
| NPT 3/4D | Ex-VIIIGNPT3/4D | 8-26 | 20 | 15 | 38 |
| NPT 1 | Ex-VIIIGNPT1 | 8-26 | 20 | 17 | 38 |
| NPT 1D | Ex-VIIIGNPT1D | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4 | Ex-VIIIGNPT1-1/4 | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4D | Ex-VIIIGNPT1-1/4D | 16-40 | 33 | 17 | 55 |
| NPT 1-1/2 | Ex-VIIIGNPT1-1/2 | 16-40 | 33 | 20 | 55 |
| NPT 1-1/2D | Ex-VIIIGNPT1-1/2D | 18-50 | 41 | 20 | 68 |
| NPT 2 | Ex-VIIIGNPT2 | 18-50 | 41 | 20 | 68 |
| NPT 2D | Ex-VIIIGNPT2D | 25-64 | 53 | 20 | 82 |
| NPT 2-1/2 | Ex-VIIIGNPT2-1/2 | 25-64 | 53 | 22 | 82 |
| NPT 3 | Ex-VIIIGNPT3 | 31-80 | 75 | 22 | 98 |
| NPT 4 | Ex-VIIIGNPT4 | 40-103 | 90 | 22 | 125 |
| G 3/8 | Ex-VIIIGG3/8 | 5-16 | 10 | 15 | 24 |
| G 1/2 | Ex-VIIIGG1/2 | 5-16 | 10 | 15 | 24 |
| G 1/2D | Ex-VIIIGG1/2D | 5-20 | 15 | 15 | 30 |
| G 3/4 | Ex-VIIIGG3/4 | 5-20 | 15 | 15 | 30 |
| SOL 3/4D | Ex-VIIIGG3/4D | 8-26 | 20 | 15 | 38 |
| G 1 | Ex-VIIIGG1 | 8-26 | 20 | 17 | 38 |
| G 1D | Ex-VIIIGG1D | 15-33 | 26 | 17 | 45 |
| G 1-1/4 | Ex-VIIIGG1-1/4 | 15-33 | 26 | 17 | 45 |
| G 1-1/4D | Ex-VIIIGG1-1/4D | 16-40 | 33 | 17 | 55 |
| G 1-1/2 | Ex-VIIIGG1-1/2 | 16-40 | 33 | 20 | 55 |
| G 1-1/2D | Ex-VIIIGG1-1/2D | 18-50 | 41 | 20 | 68 |
| G 2 | Ex-VIIIGG2 | 18-50 | 41 | 20 | 68 |
| G 2D | Ex-VIIIGG2D | 25-64 | 53 | 20 | 82 |
| G 2-1/2 | Ex-VIIIGG2-1/2 | 25-64 | 53 | 22 | 82 |
| G 3 | Ex-VIIIGG3 | 31-80 | 75 | 22 | 98 |
| G 4 | Ex-VIIIGG4 | 40-103 | 90 | 22 | 125 |
| Prensaestopas serie Ex-VII - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Máx. Salida (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M16 × 1.5 | Ex-VIIM16 | 5-16 | 10 | 15 | 24 |
| M20 × 1.5 | Ex-VIIM20 | 5-16 | 10 | 15 | 24 |
| M20 × 1,5D | Ex-VIIM20D | 5-20 | 15 | 15 | 30 |
| M25 × 1.5 | Ex-VIIM25 | 5-20 | 15 | 15 | 30 |
| M25 × 1,5D | Ex-VIIM25D | 8-26 | 20 | 15 | 38 |
| M32 × 1.5 | Ex-VIIM32 | 8-26 | 20 | 17 | 38 |
| M32 × 1,5D | Ex-VIIM32D | 15-33 | 26 | 17 | 45 |
| M40 × 1.5 | Ex-VIIM40-33 | 15-33 | 26 | 17 | 45 |
| M40 × 1,5D | Ex-VIIM40D | 16-40 | 33 | 17 | 55 |
| M50 × 1.5 | Ex-VIIM50 | 16-40 | 33 | 20 | 55 |
| M50 × 1,5D | Ex-VIIM50D | 18-50 | 41 | 20 | 68 |
| M63 × 1.5 | Ex-VIIM63 | 18-50 | 41 | 20 | 68 |
| M63 × 1,5D | Ex-VIIM63D | 25-64 | 53 | 20 | 82 |
| M75 × 2 | Ex-VIIM75 | 25-64 | 53 | 22 | 82 |
| M88 × 2 | Ex-VIIM88 | 31-80 | 75 | 22 | 98 |
| M100 × 2 | Ex-VIIM100 | 40-96 | 83 | 22 | 110 |
| M115 × 2 | Ex-VIIM115 | 40-103 | 90 | 22 | 125 |
| M130 × 2 | Ex-VIIM130 | 98-119 | 100 | 22 | 140 |
| NPT 3/8 | Ex-VIINPT3/8 | 5-16 | 10 | 15 | 24 |
| NPT 1/2 | Ex-VIINPT1/2 | 5-16 | 10 | 15 | 24 |
| NPT 1/2D | Ex-VIINPT1/2D | 5-20 | 15 | 15 | 30 |
| NPT 3/4 | Ex-VIINPT3/4 | 5-20 | 15 | 15 | 30 |
| NPT 3/4D | Ex-VIINPT3/4D | 8-26 | 20 | 15 | 38 |
| NPT 1 | Ex-VIINPT1 | 8-26 | 20 | 17 | 38 |
| NPT 1D | Ex-VIINPT1D | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4 | Ex-VIINPT1-1/4 | 15-33 | 26 | 17 | 45 |
| NPT 1-1/4D | Ex-VIINPT1-1/4D | 16-40 | 33 | 17 | 55 |
| NPT 1-1/2 | Ex-VIINPT1-1/2 | 16-40 | 33 | 20 | 55 |
| NPT 1-1/2D | Ex-VIINPT1-1/2D | 18-50 | 41 | 20 | 68 |
| NPT 2 | Ex-VIINPT2 | 18-50 | 41 | 20 | 68 |
| NPT 2D | Ex-VIINPT2D | 25-64 | 53 | 20 | 82 |
| NPT 2-1/2 | Ex-VIINPT2-1/2 | 25-64 | 53 | 22 | 82 |
| NPT 3 | Ex-VIINPT3 | 31-80 | 75 | 22 | 98 |
| NPT 4 | Ex-VIINPT4 | 40-103 | 90 | 22 | 125 |
| G 3/8 | Ex-VIIG3/8 | 5-16 | 10 | 15 | 24 |
| G 1/2 | Ex-VIIG1/2 | 5-16 | 10 | 15 | 24 |
| G 1/2D | Ex-VIIG1/2D | 5-20 | 15 | 15 | 30 |
| G 3/4 | Ex-VIIG3/4 | 5-20 | 15 | 15 | 30 |
| SOL 3/4D | Ex-VIIG3/4D | 8-26 | 20 | 15 | 38 |
| G 1 | Ex-VIIG1 | 8-26 | 20 | 17 | 38 |
| G 1D | Ex-VIIG1D | 15-33 | 26 | 17 | 45 |
| G 1-1/4 | Ex-VIIG1-1/4 | 15-33 | 26 | 17 | 45 |
| G 1-1/4D | Ex-VIIG1-1/4D | 16-40 | 33 | 17 | 55 |
| G 1-1/2 | Ex-VIIG1-1/2 | 16-40 | 33 | 20 | 55 |
| G 1-1/2D | Ex-VIIG1-1/2D | 18-50 | 41 | 20 | 68 |
| G 2 | Ex-VIIG2 | 18-50 | 41 | 20 | 68 |
| G 2D | Ex-VIIG2D | 25-64 | 53 | 20 | 82 |
| G 2-1/2 | Ex-VIIG2-1/2 | 25-64 | 53 | 22 | 82 |
| G 3 | Ex-VIIG3 | 31-80 | 75 | 22 | 98 |
| G 4 | Ex-VIIG4 | 40-103 | 90 | 22 | 125 |
| Prensaestopas serie Ex-B - Rosca métrica/NPT/G | ||||
|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M10 × 1.5 | Ex-BM10-6.2 | 3-6.2 | 12 | 14/14 |
| M12 × 1.5 | Ex-BM12-6.2 | 3-6.2 | 12 | 14/14 |
| M12 × 1.5 | Ex-BM12-8 | 4-8 | 12 | 18/18 |
| M14 × 1.5 | Ex-BM14-8 | 4-8 | 12 | 18/18 |
| M16 × 1.5 | Ex-BM16-8 | 4-8 | 12 | 18/18 |
| M16 × 1.5 | Ex-BM16-10 | 5-10 | 12 | 22/22 |
| M18 × 1.5 | Ex-BM18-10 | 5-10 | 12 | 22/22 |
| M20 × 1.5 | Ex-BM20-10 | 5-10 | 12 | 22/24 |
| M20 × 1.5 | Ex-BM20-12 | 8-12 | 12 | 24/24 |
| M20 × 1.5 | Ex-BM20-14 | 10-14 | 12 | 26/26 |
| M22 × 1.5 | Ex-BM22-14 | 10-14 | 12 | 26/26 |
| M24 × 1.5 | Ex-BM24-14 | 10-14 | 12 | 26/26 |
| M25 × 1.5 | Ex-BM25-12 | 8-12 | 12 | 24/30 |
| M25 × 1.5 | Ex-BM25-14 | 10-14 | 12 | 26/30 |
| M25 × 1.5 | Ex-BM25-18 | 13-18 | 12 | 32/32 |
| M27 × 1.5 | Ex-BM27-18 | 13-18 | 12 | 32/32 |
| M30 × 1.5 | Ex-BM30-18 | 13-18 | 12 | 32/32 |
| M32 × 1.5 | Ex-BM32-25 | 18-25 | 15 | 40/40 |
| M36 × 1.5 | Ex-BM36-25 | 18-25 | 15 | 40/40 |
| M40 × 1.5 | Ex-BM40-32 | 25-32 | 15 | 50/50 |
| M48 × 1.5 | Ex-BM48-32 | 25-32 | 15 | 50/50 |
| M50 × 1.5 | Ex-BM50-39 | 32-39 | 15 | 60/60 |
| M60 × 1.5 | Ex-BM60-44 | 36-44 | 15 | 65/65 |
| M63 × 1.5 | Ex-BM63-44 | 36-44 | 15 | 65/68 |
| M63 × 1.5 | Ex-BM63-54 | 45-54 | 15 | 75/75 |
| M64 × 2.0 | Ex-BM64-54 | 45-54 | 15 | 75/75 |
| M72 × 1.5 | Ex-BM72-54 | 45-54 | 20 | 80/80 |
| M75 × 2.0 | Ex-BM75-66 | 55-66 | 20 | 85/90 |
| M78 × 2.0 | Ex-BM78-66 | 55-66 | 20 | 90/90 |
| M80 × 2.0 | Ex-BM80-66 | 55-66 | 20 | 90/90 |
| M88 × 2.0 | Ex-BM88-77 | 67-77 | 20 | 100/100 |
| M90 × 2.0 | Ex-BM90-77 | 67-77 | 20 | 100/100 |
| M100 × 2.0 | Ex-BM100-87 | 78-87 | 20 | 110/110 |
| M110 × 2.0 | Ex-BM110-99 | 88-99 | 20 | 122/122 |
| M120 × 2.0 | Ex-BM120-108 | 99-108 | 20 | 132/132 |
| NPT 1/4 | Ex-BNPT1/4-8 | 4-8 | 12 | 18/18 |
| NPT 3/8 | Ex-BNPT3/8-10 | 6-10 | 12 | 22/22 |
| NPT 1/2S | Ex-BNPT1/2S-12 | 8-12 | 12 | 24/24 |
| NPT 1/2D | Ex-BNPT1/2D-14 | 10-14 | 12 | 26/26 |
| NPT 3/4 | Ex-BNPT3/4-10 | 6-10 | 12 | 22/32 |
| NPT 3/4 | Ex-BNPT3/4-14 | 10-14 | 12 | 26/32 |
| NPT 3/4 | Ex-BNPT3/4-18 | 13-18 | 12 | 32/32 |
| NPT 1 | Ex-BNPT1-25 | 18-25 | 15 | 40/40 |
| NPT 1-1/4 | Ex-BNPT1-1/4-32 | 25-32 | 15 | 50/50 |
| NPT 1-1/2 | Ex-BNPT1-1/2-32 | 25-32 | 15 | 50/52 |
| NPT 1-1/2 | Ex-BNPT1-1/2-39 | 32-39 | 15 | 52/52 |
| NPT 2S | Ex-BNPT2S-44 | 37-44 | 15 | 65/65 |
| NPT 2-1/2 | Ex-BNPT2-1/2-54 | 44-54 | 20 | 75/85 |
| NPT 2-1/2 | Ex-BNPT2-1/2-66 | 54-66 | 20 | 85/85 |
| NPT 3S | Ex-BNPT3S-77 | 66-77 | 20 | 100/100 |
| NPT 4S | Ex-BNPT4S-99 | 88-99 | 20 | 122/122 |
| G 1/4 | Ex-BG1/4-8 | 4-8 | 12 | 18/18 |
| G 3/8 | Ex-BG3/8-10 | 6-10 | 12 | 22/22 |
| G 1/2S | Ex-BG1/2S-12 | 8-12 | 12 | 24/24 |
| G 1/2D | Ex-BG1/2D-14 | 10-14 | 12 | 26/26 |
| G 3/4 | Ex-BG3/4-10 | 6-10 | 12 | 22/32 |
| G 3/4 | Ex-BG3/4-14 | 10-14 | 12 | 26/32 |
| G 3/4 | Ex-BG3/4-18 | 13-18 | 12 | 32/32 |
| G 1 | Ex-BG1-25 | 18-25 | 15 | 40/40 |
| G 1-1/4 | Ex-BG1-1/4-32 | 25-32 | 15 | 50/50 |
| G 1-1/2 | Ex-BG1-1/2-32 | 25-32 | 15 | 50/52 |
| G 1-1/2 | Ex-BG1-1/2-39 | 32-39 | 15 | 52/52 |
| G 2 | Ex-BG2S-44 | 37-44 | 15 | 65/65 |
| G 2-1/2 | Ex-BG2-1/2-54 | 44-54 | 20 | 75/85 |
| G 2-1/2 | Ex-BG2-1/2-66 | 54-66 | 20 | 85/85 |
| G 3 | Ex-BG3S-77 | 66-77 | 20 | 100/100 |
| G 4 | Ex-BG4S-99 | 88-99 | 20 | 122/122 |
| Prensaestopas serie Ex-BG - Rosca métrica/NPT/G | ||||
|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M12 × 1.5 | Ex-BGM12-8 | 4-8 | 12 | 18/18 |
| M14 × 1.5 | Ex-BGM14-8 | 4-8 | 12 | 18/18 |
| M16 × 1.5 | Ex-BGM16-8 | 4-8 | 12 | 18/18 |
| M16 × 1.5 | Ex-BGM16-10 | 5-10 | 12 | 22/22 |
| M18 × 1.5 | Ex-BGM18-10 | 5-10 | 12 | 22/22 |
| M20 × 1.5 | Ex-BGM20-10 | 5-10 | 12 | 22/24 |
| M20 × 1.5 | Ex-BGM20-12 | 8-12 | 12 | 24/24 |
| M20 × 1.5 | Ex-BGM20-14 | 10-14 | 12 | 26/26 |
| M22 × 1.5 | Ex-BGM22-14 | 10-14 | 12 | 26/26 |
| M24 × 1.5 | Ex-BGM24-14 | 10-14 | 12 | 26/26 |
| M25 × 1.5 | Ex-BGM25-12 | 8-12 | 15 | 24/30 |
| M25 × 1.5 | Ex-BGM25-14 | 10-14 | 15 | 26/30 |
| M25 × 1.5 | Ex-BGM25-18 | 13-18 | 15 | 32/32 |
| M27 × 1.5 | Ex-BGM27-18 | 13-18 | 15 | 32/32 |
| M30 × 1.5 | Ex-BGM30-18 | 13-18 | 15 | 32/32 |
| M32 × 1.5 | Ex-BGM32-25 | 18-25 | 17 | 40/40 |
| M36 × 1.5 | Ex-BGM36-25 | 18-25 | 17 | 40/40 |
| M40 × 1.5 | Ex-BGM40-32 | 25-32 | 17 | 50/50 |
| M48 × 1.5 | Ex-BGM48-32 | 25-32 | 17 | 50/50 |
| M50 × 1.5 | Ex-BGM50-39 | 32-39 | 17 | 60/60 |
| M60 × 1.5 | Ex-BGM60-44 | 36-44 | 17 | 65/65 |
| M63 × 1.5 | Ex-BGM63-44 | 36-44 | 17 | 65/68 |
| M63 × 1.5 | Ex-BGM63-54 | 45-54 | 17 | 75/75 |
| M64 × 2.0 | Ex-BGM64-54 | 45-54 | 17 | 75/75 |
| M72 × 1.5 | Ex-BGM72-54 | 45-54 | 20 | 80/80 |
| M75 × 2.0 | Ex-BGM75-66 | 55-66 | 20 | 85/90 |
| M78 × 2.0 | Ex-BGM78-66 | 55-66 | 20 | 90/90 |
| M80 × 2.0 | Ex-BGM80-66 | 55-66 | 20 | 90/90 |
| M88 × 2.0 | Ex-BGM88-77 | 67-77 | 20 | 100/100 |
| M90 × 2.0 | Ex-BGM90-77 | 67-77 | 20 | 100/100 |
| M100 × 2.0 | Ex-BGM100-87 | 78-87 | 20 | 110/110 |
| M110 × 2.0 | Ex-BGM110-99 | 88-99 | 20 | 122/122 |
| M120 × 2.0 | Ex-BGM120-108 | 99-108 | 20 | 132/132 |
| NPT 1/4 | Ex-BGNPT1/4-8 | 4-8 | 12 | 18/18 |
| NPT 3/8 | Ex-BGNPT3/8-10 | 6-10 | 12 | 22/22 |
| NPT 1/2-S | Ex-BGNPT1/2S-12 | 8-12 | 12 | 24/24 |
| NPT 1/2-D | Ex-BGNPT1/2D-14 | 10-14 | 12 | 26/26 |
| NPT 3/4 | Ex-BGNPT3/4-10 | 6-10 | 15 | 22/32 |
| NPT 3/4 | Ex-BGNPT3/4-14 | 10-14 | 15 | 26/32 |
| NPT 3/4 | Ex-BGNPT3/4-18 | 13-18 | 15 | 32/32 |
| NPT 1 | Ex-BGNPT1-25 | 18-25 | 17 | 40/40 |
| NPT 1-1/4 | Ex-BGNPT1-1/4-32 | 25-32 | 17 | 50/50 |
| NPT 1-1/2 | Ex-BGNPT1-1/2-32 | 25-32 | 17 | 50/52 |
| NPT 1-1/2 | Ex-BGNPT1-1/2-39 | 32-39 | 17 | 52/52 |
| NPT 2-S | Ex-BGNPT2S-44 | 37-44 | 17 | 65/65 |
| NPT 2-1/2 | Ex-BGNPT2-1/2-54 | 44-54 | 20 | 75/85 |
| NPT 2-1/2 | Ex-BGNPT2-1/2-66 | 54-66 | 20 | 85/85 |
| NPT 3-S | Ex-BGNPT3S-77 | 66-77 | 20 | 100/100 |
| NPT 4-S | Ex-BGNPT4S-99 | 88-99 | 20 | 122/122 |
| G 1/4 | Ex-BGG1/4-8 | 4-8 | 12 | 18/18 |
| G 3/8 | Ex-BGG3/8-10 | 6-10 | 12 | 22/22 |
| G 1/2-S | Ex-BGG1/2S-12 | 8-12 | 12 | 24/24 |
| G 1/2-D | Ex-BGG1/2D-14 | 10-14 | 12 | 26/26 |
| G 3/4 | Ex-BGG3/4-10 | 6-10 | 15 | 22/32 |
| G 3/4 | Ex-BGG3/4-14 | 10-14 | 15 | 26/32 |
| G 3/4 | Ex-BGG3/4-18 | 13-18 | 15 | 32/32 |
| G 1 | Ex-BGG1-25 | 18-25 | 17 | 40/40 |
| G 1-1/4 | Ex-BGG1-1/4-32 | 25-32 | 17 | 50/50 |
| G 1-1/2 | Ex-BGG1-1/2-32 | 25-32 | 17 | 50/52 |
| G 1-1/2 | Ex-BGG1-1/2-39 | 32-39 | 17 | 52/52 |
| G 2 | Ex-BGG2-44 | 37-44 | 17 | 65/65 |
| G 2-1/2 | Ex-BGG2-1/2-54 | 44-54 | 20 | 75/85 |
| G 2-1/2 | Ex-BGG2-1/2-66 | 54-66 | 20 | 85/85 |
| G 3 | Ex-BGG3-77 | 66-77 | 20 | 100/100 |
| G 4 | Ex-BGG4-99 | 88-99 | 20 | 122/122 |
| Prensaestopas serie Ex-VI - Rosca métrica/NPT/G | ||||
|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M16 × 1.5 | Ex-VIM16 | 8-14 | 15 | 24 |
| M20 × 1.5 | Ex-VIM20 | 8-14 | 15 | 24 |
| M25 × 1.5 | Ex-VIM25 | 8-17 | 15 | 30 |
| M32 × 1.5 | Ex-VIM32 | 12-24 | 17 | 38 |
| M40 × 1.5 | Ex-VIM40 | 18-30 | 17 | 45 |
| M50 × 1.5 | Ex-VIM50 | 24-36 | 20 | 55 |
| M63 × 1.5 | Ex-VIM63 | 30-46 | 20 | 68 |
| M75 × 2.0 | Ex-VIM75 | 36-60 | 22 | 80 |
| M88 × 2.0 | Ex-VIM88 | 58-72 | 22 | 96 |
| M110 × 2.0 | Ex-VIM110 | 66-90 | 22 | 125 |
| NPT 3/8 | Ex-VINPT3/8 | 8-14 | 15 | 24 |
| NPT 1/2 | Ex-VINPT1/2 | 8-14 | 15 | 24 |
| NPT 3/4 | Ex-VINPT3/4 | 8-17 | 15 | 30 |
| NPT 1 | Ex-VINPT1 | 12-24 | 17 | 38 |
| NPT 1-1/4 | Ex-VINPT1-1/4 | 18-30 | 17 | 45 |
| NPT 1-1/2 | Ex-VINPT1-1/2 | 24-36 | 20 | 55 |
| NPT 2 | Ex-VINPT2 | 30-46 | 20 | 68 |
| NPT 2-1/2 | Ex-VINPT2-1/2 | 36-60 | 22 | 80 |
| NPT 3 | Ex-VINPT3 | 58-72 | 22 | 96 |
| NPT 4 | Ex-VINPT4 | 66-90 | 22 | 125 |
| G 3/8 | Ex-VIG3/8 | 8-14 | 15 | 24 |
| G 1/2 | Ex-VIG1/2 | 8-14 | 15 | 24 |
| G 3/4 | Ex-VIG3/4 | 8-17 | 15 | 30 |
| G 1 | Ex-VIG1 | 12-24 | 17 | 38 |
| G 1-1/4 | Ex-VIG1-1/4 | 18-30 | 17 | 45 |
| G 1-1/2 | Ex-VIG1-1/2 | 24-36 | 20 | 55 |
| G 2 | Ex-VIG2 | 30-46 | 20 | 68 |
| G 2-1/2 | Ex-VIG2-1/2 | 36-60 | 22 | 80 |
| G 3 | Ex-VIG3 | 58-72 | 22 | 96 |
| G 4 | Ex-VIG4 | 66-90 | 22 | 125 |
| Prensaestopas serie Ex-VIG - Rosca métrica/NPT/G | ||||
|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo (mm) |
Longitud de la rosca GL (mm) |
Tamaño de la llave (mm) |
| M16 × 1.5 | Ex-VIGM16 | 8-14 | 15 | 24 |
| M20 × 1.5 | Ex-VIGM20 | 5-14 | 15 | 24 |
| M25 × 1.5 | Ex-VIGM25 | 5-17 | 15 | 30 |
| M32 × 1.5 | Ex-VIGM32 | 8-24 | 17 | 38 |
| M40 × 1.5 | Ex-VIGM40 | 10-30 | 17 | 45 |
| M50 × 1.5 | Ex-VIGM50 | 12-36 | 20 | 55 |
| M63 × 1.5 | Ex-VIGM63 | 18-46 | 20 | 68 |
| M75 × 2.0 | Ex-VIGM75 | 20-60 | 22 | 80 |
| M88 × 2.0 | Ex-VIGM88 | 22-72 | 22 | 96 |
| M110 × 2.0 | Ex-VIGM110 | 30-90 | 22 | 125 |
| NPT 3/8 | Ex-VIGNPT3/8 | 8-14 | 15 | 24 |
| NPT 1/2 | Ex-VIGNPT1/2 | 5-14 | 15 | 24 |
| NPT 3/4 | Ex-VIGNPT3/4 | 5-17 | 15 | 30 |
| NPT 1 | Ex-VIGNPT1 | 8-24 | 17 | 38 |
| NPT 1-1/4 | Ex-VIGNPT1-1/4 | 10-30 | 17 | 45 |
| NPT 1-1/2 | Ex-VIGNPT1-1/2 | 12-36 | 20 | 55 |
| NPT 2 | Ex-VIGNPT2 | 18-46 | 20 | 68 |
| NPT 2-1/2 | Ex-VIGNPT2-1/2 | 20-60 | 22 | 80 |
| NPT 3 | Ex-VIGNPT3 | 22-72 | 22 | 96 |
| NPT 4 | Ex-VIGNPT4 | 30-90 | 22 | 125 |
| G 3/8 | Ex-VIGG3/8 | 8-14 | 15 | 24 |
| G 1/2 | Ex-VIGG1/2 | 5-14 | 15 | 24 |
| G 3/4 | Ex-VIGG3/4 | 5-17 | 15 | 30 |
| G 1 | Ex-VIGG1 | 8-24 | 17 | 38 |
| G 1-1/4 | Ex-VIGG1-1/4 | 10-30 | 17 | 45 |
| G 1-1/2 | Ex-VIGG1-1/2 | 12-36 | 20 | 55 |
| G 2 | Ex-VIGG2 | 18-46 | 20 | 68 |
| G 2-1/2 | Ex-VIGG2-1/2 | 20-60 | 22 | 80 |
| G 3 | Ex-VIGG3 | 22-72 | 22 | 96 |
| G 4 | Ex-VIGG4 | 30-90 | 22 | 125 |
| Prensaestopas serie BGJA - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Longitud de la rosca GL (mm) |
D.E. de la rosca AG (mm) |
Longitud total OL (mm) |
Tamaño de la llave (mm) |
| M16×1.5 | BGJAM16 | 15 | 16 | 34 | 22 |
| M20×1.5 | BGJAM20 | 15 | 20 | 34 | 27 |
| M25×1.5 | BGJAM25 | 15 | 25 | 34 | 32 |
| M32×1.5 | BGJAM32 | 17 | 32 | 39 | 38 |
| M40×1.5 | BGJAM40 | 17 | 40 | 39 | 47 |
| M50×1.5 | BGJAM50 | 20 | 50 | 46 | 57 |
| M63×1.5 | BGJAM63 | 20 | 63 | 46 | 68 |
| M75×2.0 | BGJAM75 | 20 | 75 | 47 | 84 |
| M90×2.0 | BGJAM90 | 20 | 90 | 47 | 98 |
| M115×2.0 | BGJAM115 | 20 | 115 | 48 | 125 |
| NPT 3/8 | BGJANPT3/8 | 15 | 17.05 | 34 | 22 |
| NPT 1/2 | BGJANPT1/2 | 15 | 21.22 | 34 | 27 |
| NPT 3/4 | BGJANPT3/4 | 15 | 26.56 | 34 | 32 |
| NPT 1 | BGJANPT1 | 17 | 33.28 | 39 | 38 |
| NPT 1-1/4 | BGJANPT1-1/4 | 17 | 41.98 | 39 | 47 |
| NPT 1-1/2 | BGJANPT1-1/2 | 20 | 48.05 | 46 | 57 |
| NPT 2 | BGJANPT2 | 20 | 60.09 | 46 | 68 |
| NPT 2-1/2 | BGJANPT2-1/2 | 20 | 72.69 | 47 | 84 |
| NPT 3 | BGJANPT3 | 20 | 88.60 | 47 | 98 |
| NPT 4 | BGJANPT4 | 20 | 113.97 | 48 | 125 |
| G 3/8 | BGJAG3/8 | 15 | 16.66 | 34 | 22 |
| G 1/2 | BGJAG1/2 | 15 | 20.95 | 34 | 27 |
| G 3/4 | BGJAG3/4 | 15 | 26.44 | 34 | 32 |
| G 1 | BGJAG1 | 17 | 33.25 | 39 | 38 |
| G 1-1/4 | BGJAG1-1/4 | 17 | 41.91 | 39 | 47 |
| G 1-1/2 | BGJAG1-1/2 | 20 | 47.80 | 46 | 57 |
| G 2 | BGJAG2 | 20 | 59.61 | 46 | 68 |
| G 2-1/2 | BGJAG2-1/2 | 20 | 75.18 | 47 | 84 |
| G 3 | BGJAG3 | 20 | 87.88 | 47 | 98 |
| G 4 | BGJAG4 | 20 | 113.03 | 48 | 125 |
| Prensaestopas serie BGJB - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Longitud de la rosca GL (mm) |
D.E. de la rosca AG (mm) |
Longitud total OL (mm) |
Tamaño de la llave (mm) |
| M16×1.5 | BGJBM16 | 15 | 16 | 34 | 22 |
| M20×1.5 | BGJBM20 | 15 | 20 | 34 | 27 |
| M25×1.5 | BGJBM25 | 15 | 25 | 34 | 32 |
| M32×1.5 | BGJBM32 | 17 | 32 | 39 | 38 |
| M40×1.5 | BGJBM40 | 17 | 40 | 39 | 47 |
| M50×1.5 | BGJBM50 | 20 | 50 | 46 | 57 |
| M63×1.5 | BGJBM63 | 20 | 63 | 46 | 68 |
| M75×2.0 | BGJBM75 | 20 | 75 | 47 | 84 |
| M90×2.0 | BGJBM90 | 20 | 90 | 47 | 98 |
| M115×2.0 | BGJBM115 | 20 | 115 | 48 | 125 |
| NPT 3/8 | BGJBNPT3/8 | 15 | 17.05 | 34 | 22 |
| NPT 1/2 | BGJBNPT1/2 | 15 | 21.22 | 34 | 27 |
| NPT 3/4 | BGJBNPT3/4 | 15 | 26.56 | 34 | 32 |
| NPT 1 | BGJBNPT1 | 17 | 33.28 | 39 | 38 |
| NPT 1-1/4 | BGJBNPT1-1/4 | 17 | 41.98 | 39 | 47 |
| NPT 1-1/2 | BGJBNPT1-1/2 | 20 | 48.05 | 46 | 57 |
| NPT 2 | BGJBNPT2 | 20 | 60.09 | 46 | 68 |
| NPT 2-1/2 | BGJBNPT2-1/2 | 20 | 72.69 | 47 | 84 |
| NPT 3 | BGJBNPT3 | 20 | 88.60 | 47 | 98 |
| NPT 4 | BGJBNPT4 | 20 | 113.97 | 48 | 125 |
| G 3/8 | BGJBG3/8 | 15 | 16.66 | 34 | 22 |
| G 1/2 | BGJBG1/2 | 15 | 20.95 | 34 | 27 |
| G 3/4 | BGJBG3/4 | 15 | 26.44 | 34 | 32 |
| G 1 | BGJBG1 | 17 | 33.25 | 39 | 38 |
| G 1-1/4 | BGJBG1-1/4 | 17 | 41.91 | 39 | 47 |
| G 1-1/2 | BGJBG1-1/2 | 20 | 47.80 | 46 | 57 |
| G 2 | BGJBG2 | 20 | 59.61 | 46 | 68 |
| G 2-1/2 | BGJBG2-1/2 | 20 | 75.18 | 47 | 84 |
| G 3 | BGJBG3 | 20 | 87.88 | 47 | 98 |
| G 4 | BGJBG4 | 20 | 113.03 | 48 | 125 |
| Prensaestopas serie BGJC - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Longitud de la rosca GL (mm) |
D.E. de la rosca AG (mm) |
Longitud total OL (mm) |
Tamaño de la llave (mm) |
| M16×1.5 | BGJCM16 | 15 | 16 | 34 | 20 |
| M20×1.5 | BGJCM20 | 15 | 20 | 34 | 24 |
| M25×1.5 | BGJCM25 | 15 | 25 | 34 | 30 |
| M32×1.5 | BGJCM32 | 17 | 32 | 39 | 38 |
| M40×1.5 | BGJCM40 | 17 | 40 | 39 | 45 |
| M50×1.5 | BGJCM50 | 20 | 50 | 46 | 55 |
| M63×1.5 | BGJCM63 | 20 | 63 | 46 | 68 |
| M75×2.0 | BGJCM75 | 20 | 75 | 47 | 80 |
| M90×2.0 | BGJCM90 | 20 | 90 | 47 | 98 |
| M115×2.0 | BGJCM115 | 20 | 115 | 48 | 120 |
| NPT 3/8 | BGJCNPT3/8 | 15 | 17.05 | 34 | 20 |
| NPT 1/2 | BGJCNPT1/2 | 15 | 21.22 | 34 | 24 |
| NPT 3/4 | BGJCNPT3/4 | 15 | 26.56 | 34 | 30 |
| NPT 1 | BGJCNPT1 | 17 | 33.28 | 39 | 38 |
| NPT 1-1/4 | BGJCNPT1-1/4 | 17 | 41.98 | 39 | 45 |
| NPT 1-1/2 | BGJCNPT1-1/2 | 20 | 48.05 | 46 | 55 |
| NPT 2 | BGJCNPT2 | 20 | 60.09 | 46 | 68 |
| NPT 2-1/2 | BGJCNPT2-1/2 | 20 | 72.69 | 47 | 80 |
| NPT 3 | BGJCNPT3 | 20 | 88.60 | 47 | 98 |
| NPT 4 | BGJCNPT4 | 20 | 113.97 | 48 | 120 |
| G 3/8 | BGJCG3/8 | 15 | 16.66 | 34 | 20 |
| G 1/2 | BGJCG1/2 | 15 | 20.95 | 34 | 24 |
| G 3/4 | BGJCG3/4 | 15 | 26.44 | 34 | 30 |
| G 1 | BGJCG1 | 17 | 33.25 | 39 | 38 |
| G 1-1/4 | BGJCG1-1/4 | 17 | 41.91 | 39 | 45 |
| G 1-1/2 | BGJCG1-1/2 | 20 | 47.80 | 46 | 55 |
| G 2 | BGJCG2 | 20 | 59.61 | 46 | 68 |
| G 2-1/2 | BGJCG2-1/2 | 20 | 75.18 | 47 | 80 |
| G 3 | BGJCG3 | 20 | 87.88 | 47 | 98 |
| G 4 | BGJCG4 | 20 | 113.03 | 48 | 120 |
| Reductores de prensaestopas serie BGJD - Rosca métrica/NPT/G | ||||||
|---|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rosca macho | Rosca interior | D.E. de la rosca AG (mm) |
Longitud total (mm) |
Tamaño de la llave (mm) |
| M20-M16 | BGJDM16 | M20×1.5 | M16×1.5 | 20-16 | 22 | 24 |
| M25-M20 | BGJDM20 | M25×1.5 | M20×1.5 | 25-20 | 25 | 24 |
| M32-M25 | BGJDM25 | M32×1.5 | M25×1.5 | 32-25 | 28 | 30 |
| M40-M32 | BGJDM32 | M40×1.5 | M32×1.5 | 40-32 | 30 | 38 |
| M50-M40 | BGJDM40 | M50×1.5 | M40×1.5 | 50-40 | 30 | 45 |
| M63-M50 | BGJDM50 | M63×1.5 | M50×1.5 | 63-50 | 32 | 55 |
| M75-M63 | BGJDM63 | M75×1.5 | M63×1.5 | 75-63 | 35 | 68 |
| M90-M75 | BGJDM75 | M90×2 | M75×1.5 | 90-75 | 36 | 80 |
| M115-M90 | BGJDM90 | M115×2 | M90×2 | 115-90 | 36 | 98 |
| NPT1/2-NPT3/8 | BGJDNPT3/8 | NPT1/2 | NPT3/8 | 21.22-17.05 | 22 | 24 |
| NPT3/4-NPT1/2 | BGJDNPT1/2 | NPT3/4 | NPT1/2 | 26.56-21.22 | 25 | 24 |
| NPT1-NPT3/4 | BGJDNPT3/4 | NPT1 | NPT3/4 | 33.28-26.56 | 28 | 30 |
| NPT1-1/4-NPT1 | BGJDNPT1 | NPT1-1/4 | NPT1 | 41.98-33.28 | 30 | 38 |
| NPT1-1/2-NPT1-1/4 | BGJDNPT1-1/4 | NPT1-1/2 | NPT1-1/4 | 48.05-41.98 | 30 | 45 |
| NPT2-NPT1-1/2 | BGJDNPT1-1/2 | NPT2 | NPT1-1/2 | 60.09-48.05 | 32 | 55 |
| NPT2-1/2-NPT2 | BGJDNPT2 | NPT2-1/2 | NPT2 | 72.69-60.09 | 35 | 68 |
| NPT3-NPT2-1/2 | BGJDNPT2-1/2 | NPT3 | NPT2-1/2 | 88.60-72.69 | 36 | 80 |
| NPT4-NPT3 | BGJDNPT3 | NPT4 | NPT3 | 113.97-88.60 | 36 | 98 |
| G1/2-G3/8 | BGJDG3/8 | G1/2 | G3/8 | 20.95-16.66 | 22 | 24 |
| G3/4-G1/2 | BGJDG1/2 | G3/4 | G1/2 | 26.44-20.95 | 25 | 24 |
| G1-G3/4 | BGJDG3/4 | G1 | G3/4 | 33.25-26.44 | 28 | 30 |
| G1-1/4-G1 | BGJDG1 | G1-1/4 | G1 | 41.91-33.25 | 30 | 38 |
| G1-1/2-G1-1/4 | BGJDG1-1/4 | G1-1/2 | G1-1/4 | 47.80-41.91 | 30 | 45 |
| G2-G1-1/2 | BGJDG1-1/2 | G2 | G1-1/2 | 59.61-47.80 | 32 | 55 |
| G2-1/2-G2 | BGJDG2 | G2-1/2 | G2 | 75.18-59.61 | 35 | 68 |
| G3-G2-1/2 | BGJDG2-1/2 | G3 | G2-1/2 | 87.88-75.18 | 36 | 80 |
| G4-G3 | BGJDG3 | G4 | G3 | 113.03-87.88 | 36 | 98 |
| Prensaestopas antideflagrantes serie Ex-BDT - Rosca métrica/NPT/G | |||||
|---|---|---|---|---|---|
| Tipo de hilo | Número de producto | Rango de bloqueo Φ (mm) |
D.E. de la rosca AG (mm) |
Longitud total OL (mm) |
Lado opuesto (mm) |
| M16×1.5 | Ex-BDTM16 | 15 | 16 | 19 | 20 |
| M20×1.5 | Ex-BDTM20 | 15 | 20 | 19 | 24 |
| M25×1.5 | Ex-BDTM25 | 15 | 25 | 20 | 30 |
| M32×1.5 | Ex-BDTM32 | 17 | 32 | 22 | 36 |
| M40×1.5 | Ex-BDTM40 | 17 | 40 | 23 | 45 |
| M50×1.5 | Ex-BDTM50 | 20 | 50 | 27 | 55 |
| M60×1.5 | Ex-BDTM60 | 20 | 60 | 27 | 64 |
| M63×1.5 | Ex-BDTM63 | 20 | 63 | 27 | 68 |
| M75×2.0 | Ex-BDTM75 | 22 | 75 | 30 | 80 |
| M88×2.0 | Ex-BDTM88 | 22 | 88 | 31 | 96 |
| M100×2.0 | Ex-BDTM100 | 22 | 100 | 32 | 110 |
| M115×2.0 | Ex-BDTM115 | 22 | 115 | 33 | 125 |
| NPT1/2 | Ex-BDTNPT1/2 | 15 | 21.22 | 19 | 24 |
| NPT3/4 | Ex-BDTNPT3/4 | 15 | 26.56 | 20 | 30 |
| NPT1 | Ex-BDTNPT1 | 17 | 33.28 | 22 | 36 |
| NPT1-1/4 | Ex-BDTNPT1-1/4 | 17 | 41.98 | 23 | 45 |
| NPT1-1/2 | Ex-BDTNPT1-1/2 | 20 | 48.05 | 27 | 55 |
| NPT2 | Ex-BDTNPT2 | 20 | 60.09 | 27 | 64 |
| NPT2-1/2 | Ex-BDTNPT2-1/2 | 22 | 72.69 | 30 | 80 |
| NPT3 | Ex-BDTNPT3 | 22 | 88.60 | 31 | 96 |
| NPT4 | Ex-BDTNPT4 | 22 | 113.97 | 33 | 125 |
| G1/2 | Ex-BDTG1/2 | 15 | 20.95 | 19 | 24 |
| G3/4 | Ex-BDTG3/4 | 15 | 26.44 | 20 | 30 |
| G1 | Ex-BDTG1 | 17 | 33.25 | 22 | 36 |
| G1-1/4 | Ex-BDTG1-1/4 | 17 | 41.91 | 23 | 45 |
| G1-1/2 | Ex-BDTG1-1/2 | 20 | 47.80 | 27 | 55 |
| G2 | Ex-BDTG2 | 20 | 59.61 | 27 | 64 |
| G2-1/2 | Ex-BDTG2-1/2 | 22 | 75.18 | 30 | 80 |
| G3 | Ex-BDTG3 | 22 | 87.88 | 31 | 96 |
| G4 | Ex-BDTG4 | 22 | 113.03 | 33 | 125 |
ATEX, IECEx, cCSAus
II 2G Ex db IIC Gb, II 2D Ex tb IIIC Db
Ex db IIC Gb, Ex tb IIIC Db
IP66 / IP68 (5 bar, 30 min)
-60°C a +130°C
Latón niquelado, acero inoxidable 316L
Ex d (Ignífugo) están diseñados para contener una explosión interna e impedir que se propague a la atmósfera exterior. Ex e (Mayor seguridad) Los prensaestopas están diseñados para evitar que se produzcan chispas y altas temperaturas en condiciones normales de funcionamiento. La elección depende del tipo de equipo y de los requisitos específicos de la zona.
Para cables blindadosdebe utilizar un prensaestopas que proporcione dos funciones: un sellado ambiental en la cubierta del cable y un sistema mecánico de sujeción/puesta a tierra de la armadura (por ejemplo, SWA). Para cables no armadosEl prensaestopas sólo tiene que proporcionar un sellado ambiental eficaz en la cubierta del cable.
Estas clasificaciones indican el tipo de atmósfera explosiva para la que está certificado el producto. CII es para los gases más volátiles (como el hidrógeno y el acetileno), lo que significa que un prensaestopas del grupo IIC también es adecuado para los grupos menos volátiles (IIB y IIA). Igualmente, IIIC es para polvos conductores, por lo que es adecuado para polvos menos peligrosos (IIIB y IIIA).
Asegúrese de que su proyecto cumple las normas de seguridad y conformidad más estrictas. Nuestro equipo de especialistas está preparado para ayudarle a seleccionar el prensaestopas certificado correcto para su aplicación específica en ubicaciones peligrosas.
Conectar y proteger.
Diseñamos la integridad de las conexiones: robustas, seguras y fiables.
Nuestros dedicados especialistas en neumática se centran en ofrecer productos neumáticos de primera calidad
para garantizar una funcionalidad óptima de sus sistemas.
Póngase en contacto con nosotros
Zona industrial de Xuezhai, ciudad de Liushi, ciudad de Yueqing, provincia de Zhejiang, China
© 2025. Todos los derechos reservados.Powered by Bepto
English 
Deutsch 
Français 
Italiano 
Español 
Português 
Русский 
العربية 
日本語 
한국어 
Bahasa Indonesia 
Türkçe 
Nederlands 
Ελληνικά 
Български 
Čeština 
Dansk 
Eesti 
Suomi 
Magyar 
Lietuvių kalba 
Latviešu valoda 
Polski 
Română 
Svenska 
Slovenčina 
Slovenščina 
Norsk bokmål 
Українська